Hardwood Floor Sanding Process

Every hardwood floor requires sanding to keep the quality of the floor. Replacing the floor sounds expensive, and no one would want to replace the floor every time it looks dull. Here, sanding hardwood floors is the best option we all are left with to get the stunning floor we deserve.

However, sanding requires some effort and skills to do it efficiently. Don’t worry as we have prepared the steps that will help you in sanding hardwood floors cost-efficiently.

Steps to sand your floor like a pro:

1. Choose the right drum sander and the grit Sequence

The first and the most important thing related to the sanding of your floor is to choose the right drum sander. Check all the important instructions related to the drum sander before borrowing or buy it for the work.

The next thing to decide is the grit sequence you are going to use on your floor. There are different grits available for various types of sanding. You can check the layering of your hardwood floor to know which one suits it the most. 

You can start with the 24grit or 36 grit in the beginning as they provide a thoroughly sanding feature for your floor.

2. Use drum sander on the accessible area of the floor

Sand the main area with the help of the drum sander after choosing the most suitable grit. You can sand all the spots that are easily accessible by the drum sander without any problem. Try to cover most of the part with the drum as the edgers require some more efforts to clean the hard to reach spots.

Sand one floor at a time If you have multiple floors to sand. It is essential because sanding requires multiples rounds with different grits. You may end up losing your sanding pattern if you try to sand the multiple floors.

3. Use the edgers

Sanding the corners and edges of the floors is the hardest part of this process. It involves the practice of sanding hardwood floors by hand. Edgers mostly use 12 grit to help you reach the hard spots of your floor. 

They are helpful as they can take out most of the marks created by the drum sander without putting many efforts at the end.
Note: Make sure to sand the wall edge with the edgers as they are mostly exposed to the marks of the drum sanders.

4. Vacuum the sanded area

Vacuum the floor after sanding it with the drum and the edger. It is vital because sanding leaves behind a piece of sander minerals that can settle on the floor and make it harder for you to clean. Choose a good vacuum for your hardwood floor. Some of the people prefer cleaning the dirt after completing the whole sanding process to save some time. However, you may end up putting another hour in spending if not properly vacuumed.

Note: Vacuum cleaner is a must if you are sanding hardwood floor with a belt sander.

5. Repeat the steps

You may think that sanding the floor is a one time process. However, it requires you to repeat the whole process 3-4 times to get the clean floor you want for your home. It will not take much time as you will learn to do it faster when you do it the second time. It will take some time in the first round, but the other three rounds will not require many efforts by your side. It is because most of the sanding process is done in the first sanding round itself.

You will need to change the grit of the drum sander or edger in every round. You can start from 12 grit to 100 grit, depending on the type of layers you have. Most of the edgers have a 12 grit, and the drum sanders start from grit 16 and go up to the 100 grit.

Useful tips to follow while sanding the floor

The above steps will help you in sanding the hardwood floor. However, there are a few things that you will need to remember while doing it.
Additionally, We have mentioned some useful tips that will help you in the process.

Use a dry fiber cloth to clean

It would help if you always use a dry fiber cloth to clean the remaining dust from the floor. It enables you to easily clean the floor without causing any marks on the newly sanded floor. A commercial cloth may end up causing some prints and marks in the cleaning process.

Follow the Zig-zag pattern for Edgers

Sanding the edges is one of the most challenging parts of this process. You will have to put some extra effort while sanding them. They require you to use the hand force. However, a zig-zag pattern lets you sand the floor with fewer efforts.

Another advantage of following this pattern is that it does not leave any mark behind after the whole sanding process. It means that you will not need to put much effort while vacuuming the floor.

Put some marks to check the sanding quality

Most of the people using this simple hack to check whether the sanding is up to the expectations or not. You can easily put some marks with a pencil or marker before sanding your floor. The sanding of your hardwood floor is done correctly if the mark is gone completely.

Be careful with the nails

You should be careful while sanding the floor as even a single nail can cause some severe damage to the machine and floor. It is recommended to take out the nails from the floor, if any.

See also the the article: How to Repair Water Damage on Hardwood Floor

Leave a Comment

Your email address will not be published. Required fields are marked *

x